BRUEL & KJAER HF HATS 5128 - Handset Positioner for HATS Type 4606 Features and Functions; Handset Positioner Components

29
Chapter 4
Handset Positioner for HATS Type 4606
Features and Functions
4.1 Handset Positioner for HATS Type 4606 – Main Components
Handset Positioner for HATS Type 4606 consists of three main components: The Cradle, the
Cradle Positioner Assembly, the Mounting Bracket and the Alignment Jig.
Fig.4.1
(1) Cradle UA-1541
(2) Cradle Positioner
Assembly UA-1542
(3) Mounting Bracket
UA-1534
(4) Alignment Jig
UA-1535
Type 4606 has been designed for use with HATS Types 4128-C/D, and HF HATS
Types 5128-C/D, and is mounted directly on the top of the head. Type 4606 accommodates a vast
range of handsets when performing standardized, as well as non-standardized, acoustical
measurements.
1
2
3
4