BRUEL & KJAER LAN-XI - Configuration - Single Module with Battery

3
CONFIGURATION – SINGLE MODULE WITH BATTERY
1) Remove the hex wrench (QX-1315
*
, 2 mm) from its holder on the
side of the module.
2) Attach Battery Module for LAN-XI Type 2831-A, to the right
(looking from the back) of the LAN-XI module using the hex
wrench and the four captive screws.
3) Connect Type 2831-A to the LAN-XI module using Single Module
Battery Adaptor ZH-0686
†
shown.
4) Connect a network cable (LAN Cable AO-1450
*
, 2 m Cat 6).
5) If you are going to use LAN-XI Notar™ BZ-7848-A or Sonoscout™
NVH Recorder BZ-5950, insert a mini-SD card, micro-SD card or
micro-SD card with adaptor
‡
(using local storage).
Shown: 16 GB Micro-SD Card with Mini-SD Adaptor UL-1018
**
.
150424
1
2
4
5
3
*
Included with LAN-XI Module Types 3050, 3052, 3053, 3056, 3057, 3160 and 3161
†
Included with Battery Module for LAN-XI Type 2831-A
‡
Older modules have a mini-SD slot, newer modules a micro-SD slot
**
Included with LAN-XI Notar BZ-7848-A