Bruno Berlin - Bruno Bed Optional Components; Rolled Slatted Frame Installation; Mattress and Topper Setup

26 27
PLACING THE ROLLED SLATTED FRAME
•
Place the rolled slatted frame on the support surfaces of the
assembled bed frame. The first wooden slat should be placed in
front of the roller slat stoppers.
• Unfold the remaining slats until the last slat can be placed back
behind the stoppers.
• If you are using another slatted frame with a fixed frame, you
should not use the roller slat stoppers.
PLACE BRUNO MATTRESS
With the help of another person, unpack the Bruno mattress
and place it on the slatted frame using the four carrying loops
located on the underside of the mattress. The white surface of
the mattress should face upwards. Wait about 2 hours until the
mattress is completely filled with air.
ATTENTION: Due to the weight of the mattress, always carry
using all four carrying loops with the help of another person.
UNPACK AND PLACE TOPPER
Then you can also unpack the topper and place it on the
mattress.
WASH TOP COVER
The white lying surface of the mattress (as well as the white
cover of the comfort topper) can be removed with the zipper
and washed in the washing machine at a maximum of 60°C
on the gentle cycle. The grey mattress cover is washable by
hand.
THE ROLLED SLATTED FRAME OPTIONAL THE BRUNO MATTRESS AND TOPPER OPTIONAL