Bruno Berlin - Bruno Bedstead Construction; Scope of Delivery; Bedstead Assembly Steps

24 25
SCOPE OF DELIVERY
ASSEMBLY
• Assemble the bed on a clean and soft base.
• Insert the two transverse parts into the centre part and the two
side parts. All parts should be upside down so that the screws
can be inserted afterwards.
THE BEDSTEAD
 1  PACKAGE WITH 2 SIDE PARTS AND 1 MIDDLE PART IN 200 CM LENGTH.
INCL. SCREWS AND ACCESSORIES:
A: 10 COUNTERSUNK SCREWS M8 TO CONNECT THE BED FRAME.
B: 8 ROUNDHEADED SCREWS M8 FOR THE ROLLED SLATTED FRAME STOPPERS
C: 8 ROLLED SLATTED FRAME STOPPERS
D: 1 ALLEN KEY
 2  PACKAGE WITH 2 CROSS PARTS IN THE WIDTH YOU ORDERED
140, 160, 180 OR 200 CM
 3  PACKAGE WITH THE ROLLED SLATTED FRAME
OPTIONAL:
 4  BRUNO MATTRESS
 5  BRUNO TOPPER
C
x 8
B
x 8
C
B
A
SIDE PART
in Package 1
CROSS SECTION
in Package 2
MIDDLE PART
in Package 1
SIDE PART
in Package 1
CROSS SECTION
in Package 2
C
C
C
C
C
B
B
B
B
B
A
A
A
A
A
A
A
A
A
A
x 10
• The 10 connecting screws (A) can now be screwed into the
frame parts from above.
• Then turn the bed frame and attach the optional 8 rolled
slatted frame stoppers (B and C), provided that you want to
use the rolled Slatted frame.