What to do if Brusatori BR motor does not start?
If the Brusatori Engine motor does not start, the possible causes are a lack of power supply, a failure in the brake release, or an encoder/resolver malfunction. To address this, verify the power supply and drive connections. Also, check the brake connection for faults. Finally, inspect the wirings and connections of the encoder/resolver for any issues.
Why is my Brusatori BR motor overheating?
If the Brusatori Engine motor overheats, it could be due to abnormal operating values or cooling problems, a malfunctioning thermal protection, overload or abnormal power supply, or a brake release issue. Ensure the fan is working correctly, and check that the thermal protection is functioning as expected. Compare the nominal values with the displayed values. Also, verify the brake's functionality.
How to fix a Brusatori BR motor that runs slowly?
If the Brusatori Engine motor runs slowly or not as intended, the cause might be an inverter malfunction, wrong connection or wiring, or an encoder/resolver malfunction. Ensure that the displayed and nominal values correspond, and check the inverter settings and connection. Also, check wirings and connections, and look for any encoder/resolver faults.
What causes the brake on my Brusatori BR to not work?
If the Brusatori Engine brake does not work, it could be due to a brake fault or wrong brake connection/wiring. Check the connections and inspect the brake for any damage.
How to reduce high noise level in Brusatori BR Engine?
High noise levels in the Brusatori Engine can be caused by foreign bodies inside the motor or wrong inverter settings. To resolve this, verify the presence of any foreign bodies inside the motor and check the inverter settings.
Why is my Brusatori BR experiencing vibrations?
Vibrations in the Brusatori Engine can be caused by abnormal balance, worn out bearings, or loose fixing screws. To address this, balance the motor correctly, tighten any loose screws, and replace worn out bearings.
Basic manual scope, safety instructions, intended application, and warnings.
Explains warning symbols, harmonized standards, directives, and UL certification.
Defines the coding system for configuring a BR series motor.
Details of the motor nameplate and the meaning of its codes.
Lists key motor characteristics and available optional features.
Detailed electrical parameters, performance curves, and motor specifications.
Physical dimensions and layout for various BR motor series models.
Cooling fan, brakes, position sensors, thermal protection, and bearings.
Instructions and diagrams for power and signal connections.
Guidelines for transport, storage, mounting, and initial commissioning.
Defines environmental limits, operational hazards, and safety precautions.
Procedures for motor upkeep, common problems, and solutions.
Guidelines for motor disposal and relevant compliance certifications.
Contact details for Brusatori Srl, including address, phone, fax, website, and email.
To Next Page
General