How to start my Brute Lawn Mower if the engine won't start?
If your Brute Lawn Mower engine won't start, first, ensure the fuel tank is filled with fresh fuel. Next, check that the spark plug wire is securely connected to the spark plug. Also, verify that the wiring harness is properly connected. Finally, make sure the battery is charged or replace it if necessary.
Why is my Brute Lawn Mower vibrating so much?
If your Brute Lawn Mower is vibrating excessively, contact an authorized dealer for assistance. The issue could be due to a damaged, out of balance, or bent mower blade, loose blade components, a loose or missing air lift (if equipped), or a lumpy or frayed belt.
What to do if my Brute Lawn Mower engine stalls after starting?
If your Brute Lawn Mower engine stalls or loses power after running, make sure the blade control is held securely against the handle at all times during operation. Also, check the fuel level and fill it to the proper level if it's low. Clean or replace the engine pre-cleaner and/or air cleaner if they are dirty. Service the spark plug if it's fouled or the gap is set improperly. Lastly, drain and clean the fuel system if there is water, debris, or stale fuel in it.
Why is my Brute 7800887 cutting grass unevenly?
If your Brute Lawn Mower is cutting grass improperly, you may need to adjust the cutting height. Also, adjust to a slower forward speed. For issues related to the cutting blade (dull or damaged), contact an authorized dealer.
General| Brand | Brute |
|---|---|
| Model | 7800887 |
| Category | Lawn Mower |
| Language | English |
To Next Page
