EasyManua.ls Logo

Bryant 113A - Page 22

Bryant 113A
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
COMBINATION RATINGS CONTINUED
ARI Ref. No. Model Number Indoor Model Furnace Model Capacity EER S EER
3043577 113ANA060 ---F CNPV*6024A** 315(A,J)AV066135 56000 11.00 13.50
3043578 113ANA060 ---F CNPV*6024A** 315(A,J)AV066155 56500 11.20 13.50
3099556 113ANA060 ---F CNPV*6024A** 353AAV060120 56500 11.00 13.20
3043576 113ANA060 ---F CNPV*6024A**+TDR 57000 11.00 13.00
3043566 113ANA060 ---F CSPH*6012A** 313*AV048090 56000 11.00 13.20
3043567 113ANA060 ---F CSPH*6012A** 313*AV060110 56500 11.20 13.20
3043568 113ANA060 ---F CSPH*6012A** 313*AV060135 56000 11.00 13.20
3043583 113ANA060 ---F CSPH*6012A** 315(A,J)AV060110 56500 11.00 13.20
3043584 113ANA060 ---F CSPH*6012A** 315(A,J)AV066135 56500 11.20 13.50
3043585 113ANA060 ---F CSPH*6012A** 315(A,J)AV066155 56500 11.20 13.50
3099559 113ANA060 ---F CSPH*6012A** 353AAV060100 56500 11.00 13.20
3099560 113ANA060 ---F CSPH*6012A** 353AAV060120 56500 11.00 13.20
3043582 113ANA060 ---F CSPH*6012A**+TDR 57500 11.00 13.00
3069700 113ANA060 ---F FE4ANB006+UI 57500 11.50 13.50
3043587 113ANA060 ---F FV4BNB006 57000 11.20 13.50
3043586 113ANA060 ---F FX4CN(B,F)060 58000 11.00 13.20
3043588 113ANA060 ---F FY4ANB060 56500 11.00 13.00
* Tested co mbination
EER Energy Efficiency Ratio
SEER Seasonal Energy Efficiency Ratio
TDR Time---Delay Relay In most cases, only 1 method should be used to achieve TDR function. Using more than 1 method in a system may cause degradation in p erformance.
Use either the accessory Time---Delay Relay KAATD0101TDR or a furnace equipped with TDR. Most Bryant furnaces are equipped with TDR.
TXV Thermostatic Expansion Valve
NOTES:
1. Ratings are net values reflecting the effects of circulating fan motor heat. Supplemental electri c heat is not i ncluded.
2. Tested outdoor/indoor combinations have been tested in accordance with DOE test procedures for central air conditioners. Ratings for other combinations are d etermined under DOE
computer simulation procedures.
3. Determine actual CFM values obtaina ble for y our system by referring to fan performance data in fan coil or furnace coil literature.
4. Do not apply with capillary tube coils as performance and reliability are affected.
113A

Other manuals for Bryant 113A

Related product manuals