EasyManua.ls Logo

Bryant 564A - START-UP CHECKLIST; PRELIMINARY INFORMATION AND CHECKS; START-UP DATA COLLECTION

Bryant 564A
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
START-UP CHECKLIST (REMOVE AND STORE IN JOB FILE)
I. PRELIMINARY INFORMATION
Model No. ...................................................................................................................................................................................................................
Serial No. ....................................................................................................................................................................................................................
Date .............................................................................................................................................................................................................................
Technician ...................................................................................................................................................................................................................
II. PRE-START-UP
___ Verify that all packing materials have been removed from unit
___ Verify that condensate connection is installed per installation instructions
___ Check all electrical connections and terminals for tightness
___ Check that indoor (evaporator) air filter is clean and in place
___ Verify that unit installation is level
___ Check fan wheel and propeller for location in housing and setscrew tightness
III. START-UP
Supply Voltage L1-L2 __________ L2-L3 _________ L3-L1 __________
Compressor Amps L1 __________ L2 _________ L3 __________
Indoor (Evaporator) Fan Amps __________
TEMPERATURE
Outdoor (Condenser) Air Temperature __________ DB
Return-Air Temperature __________ DB __________ WB
Cooling Supply Air __________ DB __________ WB
PRESSURES
Refrigerant Suction __________ psig
Suction Line Temp* __________
Refrigerant Discharge __________ psig
Discharge Temp† __________
___ Verify refrigerant charge using charging tables
* Measured at suction inlet to compressor
Measured at liquid line leaving condenser
—19—

Related product manuals