A. Zoning Design Checklist
Use this checklist to make sure that you have completed each necessary task when designing a Zone Perfect Plus installation.
Assigning Zones
[] Task 1—Assess the homeowner’s goals for comfort and energy savings.
[] Task 2—Conduct a site survey and make preliminary zone assignments.
Sizing the Equipment
[] Task 3—Calculate block load estimates and zone load estimates.
[] Task 4—Size the heating and cooling equipment.
Laying Out and Sizing the Duct System
[] Task 5—Determine bypass needs.
[] Task 6—Choose register and return locations.
[] Task 7—Lay out supply ducts and locate dampers.
[] Task 8—Determine appropriate damper and duct sizes.
Laying Out Zone Components
[] Task 9—Choose locations for zone sensors.
—14—
To Next Page
Loading...
