Bryston 10B User Manual

CROSSOVER
OWNER’S MANUAL
for Models
10B-STD, 10B-SUB & 10B-LR
10B

Bryston 10B Specifications

General

Input Impedance	10 kΩ
Output Impedance	100 Ω
THD+N	< 0.005%
Outputs	XLR
Signal to Noise Ratio	> 110dB
Channels	2-way or 3-way
Crossover Slopes	12 dB/octave
Crossover Frequency Range	20 Hz - 20 kHz
Inputs	XLR

Summary

Introduction to 10B Crossover Models

Mono Low Pass Mode Operation

Details the Mono Low Pass mode for 10B-SUB and 10B-STD.

Stereo Mode Operation

Describes the stereo mode functionality of the 10B crossover.

Three Way Mono Mode (10B-LR)

Explains the three-way mono mode specific to the 10B-LR.

Two Way Stereo Mode Hookup Example

Left Channel Configuration (Stereo Mode)

Details controls and filtering for the left channel in stereo mode.

Right Channel Configuration (Stereo Mode)

Details controls and filtering for the right channel in stereo mode.

Stereo 4-Way Configuration with Multiple 10B Units

Crossover Unit 1 in 4-Way Stereo

Crossover Unit 2 in 4-Way Stereo

Crossover Unit 3 in 4-Way Stereo

Crossover Unit 4 in 4-Way Stereo

Linkwitz-Riley Frequency Programming Tables

10B-LR Capacitor Values for Programming

Frequency to Resistor Mapping (Part 1)

Mapping table for frequencies to specific resistor values.

Linkwitz-Riley Frequency Programming Tables (Cont.)

Alternative 10B-LR Capacitor Values

Frequency to Resistor Mapping (Part 2)

Continuation of the mapping table for frequencies to resistor values.

Important Safety Instructions

Bryston Limited Warranty Information