Bryston BDP User Manual

BDP WiFi Adapter
Owner’s Manual
Thank you for purchasing a Bryston BDP Wi Adapter.
This adapter is compatible with all hardware versions
of the BDP when they are running rmware version
S2.36 or greater.
The adapter is compatible with most wi networks
based on the 802.11n standard. Naturally, performance
and speed are largely dependent on distance from
the wi access point and interference from physical
obstructions and competing wi traic from other
nearby devices and networks. The theoretical
maximum throughput is 300mbps which is far beyond
what is needed to stream high resolution audio from
an NAS or TIDAL.
The adapter kit includes a short USB extension cable
which allows some exibility in placing the wi
adapter in order to obtain the best wi reception. If
you experience audio dropouts or diiculty controlling
the BDP from your network connected device,
experiment with using the extension cable and placing
the adapter away from your audio equipment to try
and get better signal.
To install the wi adapter, simply remove the white
protective cap, and insert the adapter into any free
USB port on your BDP. Disconnect any other network
cable. Reboot the BDP and follow the instructions on
the reverse side of this page.
Questions or requests for help can be directed to our
service department at
http://bryston.com/pages/contact.html
or by phone +1-705-742-5325

Bryston BDP Specifications

General

Brand	Bryston
Model	BDP
Category	Modem
Language	English

Summary

Bryston BDP WiFi Adapter Introduction and Compatibility

Adapter Overview and Compatibility

Details compatibility with BDP firmware S2.36+ and 802.11n networks, discussing performance factors.

Included Kit and Placement Advice

Mentions the included USB extension cable and its use for improving WiFi signal reception.

Basic Installation Steps

Provides initial instructions for inserting the adapter and rebooting the BDP.

Support Contact Information

Offers service department contact details via website and phone.

Connecting and Configuring the WiFi Adapter

Initial Connection and Network Setup

Connects the dongle, reboots BDP, connects to the 'Bryston Digital Player' network.

Selecting Your WiFi Network

Navigates to Network Interfaces to select a visible network or enter BSSID for hidden networks.

Entering Network Security Credentials

Specifies security type and password for the desired network and applies settings.

Finalizing Connection and Usage

Instructs device to rejoin configured network and navigate to my.bryston.com for use.