Need help?Do you have a question about the Bryton Rider and is the answer not in the manual?
General| GPS | Yes |
|---|---|
| Connectivity | Bluetooth, ANT+ |
| Display | Color LCD |
| Waterproof Rating | IPX7 |
| Sensors Supported | Heart rate, cadence, speed, power |
| Navigation | Turn-by-turn navigation |
| Battery Life | Varies by model (e.g., 16-35 hours) |
Introduces the Rider 40 device and its physical buttons for operation.
Lists the included accessories and optional items with the Rider 40.
Instructions on how to power the Rider 40 device on and off.
Steps to perform a reset on the Rider 40 device.
Guide for the initial setup wizard upon first turning on the Rider 40.
Instructions for connecting the Rider 40 to a PC for charging and data sync.
Explains the various icons displayed on the Rider 40 screen.
Steps to prepare the Rider 40 for training sessions.
How to manage and share data from the Rider 40 via a computer.
How to set up simple workouts based on time, distance, or calories.
Guide to setting up simple workouts based on a specific distance goal.
Guide to setting up simple workouts based on a calorie burn goal.
How to create custom interval workouts with work and recovery periods.
How to use the Lap feature to mark laps automatically by location or distance.
Instructions for setting up lap tracking based on geographical location.
Instructions for setting up lap tracking based on distance covered.
How to start a previously saved workout plan from your saved list.
How to start workouts based on preset interval workout data.
How to start workouts downloaded from Bryton Bridge application.
How to perform tests to measure MHR, LTHR, FTP, and MAP.
Instructions on how to stop the current training session.
How to navigate previously saved rides from the device history.
How to navigate rides uploaded from the Bryton Bridge application.
How to navigate saved Points of Interest (POI) on the Rider 40.
Explanation of how the Rider 40 records ride data.
Instructions on how to stop the current navigation mode.
How to add the current location as a Point of Interest (POI).
How to view the history of completed rides on the Rider 40.
How to use the Countdown mode for time-based notifications.
How to use the Timer mode to measure elapsed time.
How to set and adjust altitude information for current and other locations.
How to set and calibrate altitude for additional locations.
How to customize bike profiles, including type, weight, and wheel size.
How to view details and data for configured bikes.
How to customize display settings for meters, tracks, and other views.
How to customize the data fields displayed in meter views.
How to customize display settings for Follow Track, Altitude, and Lap screens.
How to configure the Auto Switch feature for automatic screen changes.
How to view the current GPS signal status and search modes.
How to manage and configure connected sensors like heart rate, speed, and cadence.
Steps to calibrate the power meter sensor for accurate readings.
How to customize general system settings like backlight, alerts, and units.
How to set the auto backlight off time for the device.
How to enable or disable alerts on the Rider 40.
How to set daylight saving, date/time format, and unit system.
How to change the display language of the Rider 40.
How to erase all data from the device, except the user profile.
How to set and modify personal user profile information like gender, age, and weight.
How to check the current firmware version of the Rider 40.
Technical specifications for the Rider 40 and its accessories.
Specifications and details for the Heart Rate Monitor accessory.
Information on replacing the battery in the heart rate monitor/cadence sensor.
Step-by-step guide on how to mount the Rider 40 device onto a bike.
Instructions for installing the optional speed and cadence sensors.
Instructions for installing the optional heart rate belt.
A chart listing wheel sizes and their corresponding circumferences.
Important tips for basic care and maintenance of the Rider 40 device.
To Next Page
