Bryton GARDIA R300 - User Manual

1
Back to Top
REARVIEW RADAR AND TAIL LIGHT
R300
USER MANUAL

Summary

Introduction

Getting Started

Steps for initial setup and first use of the Gardia R300.

Reboot the Device

Light Operation

Describes manual and smart control modes for the tail light functions.

Device Information

Charging the Device

Step-by-step guide on how to charge the Gardia R300 using a USB connection.

Installing the Device

The Gardia R300 and the Gardia App

Pairing the Gardia Device With Your Phone

Step-by-step guide on how to pair the Gardia R300 with a smartphone via Bluetooth.

Updating the Device Firmware via the App

Instructions on how to update the Gardia R300's firmware using the companion app.

Viewing the Gardia on the App

Customizing the Gardia App Settings

The Gardia R300 and the Bryton Rider Series

Pairing the Gardia Device With Your Rider Series

Steps to pair the Gardia R300 with Bryton Rider-series bike computers for integration.

Viewing the Gardia on the Rider Series

Customizing the Rider Series Settings

Contol Light Patterns

Enable Brake Light

Bryton GARDIA R300 Specifications

General

Weight	66 g
Viewing Angle	40°
Light Output	20 lumens
Waterproof	IPX7
Charging Port	USB-C
Connectivity	Bluetooth, ANT+
Light Modes	High, Low, Flash
Battery Life	17 hours
Sensors Compatibility	Compatible with Bryton