Need help?Do you have a question about the Bryton Rider 11 and is the answer not in the manual?
General| Display Size | 2.3 inches |
|---|---|
| Water Resistance | IPX7 |
| GPS | Yes |
| Barometer | Yes |
| Operating Temperature | -10°C to 50°C |
| Display Type | LCD |
| Wireless | Bluetooth, ANT+ |
| Sensors Compatibility | Compatible with ANT+ and Bluetooth sensors |
Explains the buttons and their functions on the Rider 11 device.
Describes how to restart the Rider 11 device by pressing two keys simultaneously.
Lists included and optional accessories for the Rider 11 device.
Instructions on how to charge the Rider 11 device using a PC and USB cable.
Explains the meaning of various icons displayed on the Rider 11 device.
Guides through the initial setup wizard upon first turning on the device.
Instructions on how to start, record, and stop rides with the Rider 11 device.
Provides visual guides for mounting the Rider 11 device on a bicycle.
Explains how to sync tracks with the Bryton Active App via Bluetooth.
Details how to upload and share records to the Brytonactive.com website.
Guides on syncing data with platforms like Strava, Komoot, etc.
Instructions for downloading and using the Bryton Update Tool for firmware and GPS data.
Explains how to set up bike profiles using wheel size for accurate ride data.
Guides on manually calibrating the device's altitude for accurate measurements.
Instructions for pairing optional sensors like heart rate and cadence sensors.
How to delete records from the device to free up storage space.
Setting the preferred units of measurement (e.g., km/h, °C).
How to set the device's time and date format.
How to adjust the total mileage recorded by the device.
Procedure for resetting the device to factory default settings.
How to set up phone notifications (calls, texts, emails) on the Rider 11.
How to customize displayed data fields within the Bryton Active App.
Using the Bryton Active App to calibrate the device's altitude.
Explains the meaning and units of various data fields displayed on the device.
Technical specifications for the Rider 11 device and optional sensors.
Specifications and details for the optional Smart Cadence Sensor.
Specifications and details for the optional Smart Heart Rate Monitor.
Instructions on how to replace the batteries in the sensors.
A chart listing wheel sizes and their corresponding circumference values.
Step-by-step guide to installing the optional Speed and Cadence sensors.
Instructions on how to properly wear and attach the heart rate belt.
Guidelines for maintaining and protecting the Rider 11 device.
Information regarding radio frequency exposure compliance for the device.
To Next Page
