BSB FSD-C Series - User Manual

FSD-C Series
Circular Single Blade
Combination Fire and
Smoke Damper
• ES classified fire dampers with reduced smoke leakage characteristics to
BS EN 1366-2 (test standard) and BS EN 13501-3 (extended field of application)
• Aerodynamically Air Control tested to BS EN 1751
• Tested and assessed installation methods in differing support constructions
BS EN 1366-2
• Rotatable cleats
®
• Can be installed from one side of the fire separation without the need to fit a
secondary installation plate or provide fire-rated infill material
• Replaceable thermal fuse element from outside of the duct.
• Commissioning friendly
• Blade Position Indicator
• IP54 degree of protection
• Test switch for periodic damper testing
• LED green indication when lit indicates that a supply voltage is present and that the
temperature fuses are operational
• Damper casings conform to BS EN 1506
• CE marked complying with the requirements of EN 15650
M
A
D
E
I
N
B
R
I
T
A
I
N
M A N U F A C T U R E R S O F A I R , F I R E A N D S M O K E C O N T R O L P R O D U C T S
V12103

BSB FSD-C Series Specifications