BSD-Racing BS909T User Manual

www.bsdracing.com
Product Size:
Length: 410mm
Width: 320mm
Height: 165mm
Wheelbase: 305mm
Tire size: 100 * 51mm
Ground clearance: 25mm
Gear Ratio: 12.98:1
Brushless Motor
(RC 540 KV: 3570) and
Brushless ESC
SAFETY PRECAUTIONS
This radio controlled racing car is not a toy!
This high-performance R/C model is recommended for ages14 and older.
First-time builders should seek the advice of experienced modellers
before commencing assembly.
Take enough safety precautions prior to operating this model.
You are responsible for this model's assembly and safe operation!
4WD Drive System.
Ready Assemble Ready to Run.
High Performance RC-540 KV 3570 Brushless Electric Motor,More power!
Brushless ESC 35A-SL
7.2V Ni-Mh Rechargeable Battery,Long Running Time!
Assembled Chassis.
Colored Coil Spring Damped Suspension System.
Full Function Radio Control.
Battery in Standing Position to Save Space,Keeping the Car in Perfect Balance!
Waterproof and Dustproof Sealed Gearbox.
Fast Easy Assembly and Disassembly Receiver and Battery Cover.
Quality Differential with Four Bevel Gears.
Precise Sealed Ball Bearing for the Whole Model.
Aluminum Alloy Driveshafts.
1/10 4WD ELECTRIC-POWERED BRUSHLESS MONSTER TRUCK
BSD-RACING
Instruction Manual
Highlights:

BSD-Racing BS909T Specifications

General

Scale	1/10
Drivetrain	4WD
Motor Type	Brushed
Power Source	Electric
Terrain	Off-Road
Chassis Material	Plastic
Body Material	Polycarbonate
Radio	2.4GHz
Assembly Level	Ready-to-Run

Summary

Product Highlights

Key Features Overview

Lists the primary features and capabilities of the BSD-RACING 1/10 4WD electric-powered brushless monster truck.

Safety Precautions

Required Equipment and Tools

Tools for Building and Maintenance

Lists essential tools like hobby knife, pliers, screwdrivers, and wrenches for assembly and maintenance.

Additional Items for Operation

Specifies necessary items like AA batteries for the transmitter and a LiPo battery charger.

Transmitter Preparation

Battery Installation and Checks

Instructions for installing AA batteries, checking polarity, and testing the transmitter's battery light.

Antenna Installation

Guidance on inserting and tightening the transmitter antenna for proper signal transmission.

Transmitter Operation Guide

Transmitter Component Glossary

Explains the function of each part of the transmitter, including steering wheel, throttle trigger, and LED indicator.

Pre-Operation Checklist

Steps to perform before operating the RC vehicle, such as installing antennas and batteries.

RC Operating Procedures

Step-by-step guide for operating the RC car, including powering on/off and basic controls.

Optional Parts and Upgrades

Optional Parts List

Lists available optional parts and upgrade components for customization and enhanced performance.

Lithium Polymer Battery Precautions

Charging Guidelines

Detailed instructions on safe charging current, voltage, temperature, and avoiding reverse charging.

Discharging and Storage

Guidelines for safe discharging current, operating temperature, and proper storage conditions for Li-Po batteries.

General Battery Warnings

Critical warnings regarding handling, short-circuiting, disassembly, disposal, and physical damage to Li-Po batteries.