45
# SCREEN MESSAGES
Test Strip is used or
damaged.
Use a new test strip
Blood sample was applied to
the test strip before the blood
symbol ( ) appeared on the screen.
Apply blood sample to the test
strip after the blood symbol appears
on the screen.
Temperature is too hot or too cold
for the system to work properly.
The operating temperature
should be 10~40°C (50~104°F).
Please use the system after about 20
minutes.
The blood sample is not enough
for measurement because
of abnormally high viscosity or
insufficient volume
Repeat test with a new test strip.
MESSAGES
SOLUTION
DESCRIPTION
To Next Page