Need help?Do you have a question about the BSS Audio DPR 402 and is the answer not in the manual?
General| Brand | BSS Audio |
|---|---|
| Model | DPR 402 |
| Category | Compressor |
| Language | English |
Explains the human ear's wide dynamic range and electronic limitations. Discusses usable dynamic range and headroom.
Defines compressors and limiters, their operation, and differences in gain reduction.
Illustrates how threshold affects compression and the impact of different ratios on signal levels.
Details the function of attack time, release time, and ratio in controlling signal dynamics.
Explains de-essing as selective high-frequency compression to control sibilance.
Introduces peak limiting as a fast-acting gain reduction for transient control.
Introduces the DPR-402 as a versatile stereo unit combining compression, de-essing, and peak limiting.
Details mandatory earthing of the appliance for safety and proper system grounding.
Instructions for unpacking, inspecting for damage, and retaining packing materials.
Identifies and describes the front panel controls and metering displays.
Details the rear panel connectors, switches, and voltage selector.
Specifies rack space requirements and advises on placement to minimize noise.
Explains voltage selection, fuse types, and replacement procedures.
Details grounding requirements and the function of the power ON indicator LED.
Describes balanced and unbalanced input wiring on XLR connectors.
Details balanced and unbalanced output wiring on XLR connectors.
Explains stereo linking, barrier strip connections, and peak limiter switch.
Explains the threshold control range and the function of the ratio control.
Details the attack and release time controls and their effect on signal response.
Describes the auto time feature and the gain control for level compensation.
Explains the bypass switch for quick function disabling and the mode switch for de-essing.
Details the LEDs indicating input signal level relative to threshold and amount of gain reduction.
Explains the output level meter and the meter input switch for signal comparison.
Describes the MON S.C. switch for monitoring control side chain signals.
Explains broadband de-essing setup using DE-ESS and FREQ controls or MODE switch.
Details HF only de-essing setup using the MODE switch and compressor controls.
Describes peak limiter operation, threshold calibration, and LED indicators.
Details using the barrier strip for inserting external filters into side chains.
Lists various configurations for special effects using barrier strip links.
Explains different methods for stereo linking the unit's channels.
Provides initial settings for general compression and dynamic adjustment tips.
Details settings for wide band de-essing with simultaneous compression.
Explains HF only de-essing with full dynamic control and peak limiter usage.
Addresses no output issues, fuse failures, and servicing recommendations.
Defines terms like Active, Amplitude, Attack Time, Balanced, Breathing, Bright up, Compressor, dB, dBm.
Defines terms like dBV, Distortion, Drop-in, Equalisation, Frequency, Frequency Response, Gain Reduction, Headroom, Impedance.
Lists general electrical specs, input/output levels, frequency response, noise, distortion, and compressor parameters.
Details de-esser and peak limiter specs, notes, and available facilities like metering.
Specifies physical dimensions, mounting type, power consumption, and unit weight.
Outlines the one-year warranty against defects, exclusions, and contact information.
To Next Page