BSS Audio DPR 402 - Mounting Requirements and Weight

43
Stereo Switch (Rear Panel): Couples channel 1 and channel 2 control signals for stereo
operation. Indicated on the front panel by an LED.
Rear Connections: INPUT: XLR 3-31 or equivalent (Balanced)
OUTPUT: XLR 3-32 or equivalent (Unbalanced)
ACCESS POINTS: Barrier strip, providing control and subtract side
chain insertion points including HP and LP filter sends, pre-emphasis
and de-emphasis network sends; inverse phase sends for expander
mode; and control side chain DC access point for stereo, quad etc.,
coupling and gating.
Power: Switch selectable 120V or 240V, 50/60Hz, 15VA. AC fuses on the
rear of the unit. DC fuses located inside the unit.
Mounting requirements: (Ht x W x D)
44.5mm x 483mm x 229mm
1U/1¾" x 19 x 9"
Weight: 4.5kg (Packed)