Need help?Do you have a question about the BSV BS POOL PRO Series and is the answer not in the manual?
Details technical data for PRO50, PRO70, PRO100, and PRO150 models.
Lists common operational features across all PRO series equipment.
Provides essential advice and safety measures for installation and operation.
Outlines key principles for installing the chlorination cell and probes correctly.
Illustrates the water flow connections for PRO50-70 series equipment.
Illustrates the water flow connections for PRO100-150 series equipment.
Shows dimensions for RP150 and RP100 electrolysis cells.
Details how to connect the electrolysis cells to the main unit using cables.
Introduces the optional AUTO kit for pH measurement and regulation.
Lists and illustrates the components included in the AUTO kit.
Details the initial steps for calibrating the free chlorine probe.
Shows the electrical connections for PRO50/70 units, detailing terminal functions.
Displays the electrical connections for PRO100/150 units, detailing terminal functions.
Explains the four control modes: Manual, Automatic, and Semi-automatic.
Guides on setting the desired ORP or PPM level for chlorine control.
Details the calibration process for the free chlorine probe using DPD1 measurements.
Details the process for calibrating the pH probe using standard solutions.
Lists common warning messages, their causes, and required actions.
Details alarm conditions like 'NO WATER FLOW', 'SHORT CIRCUIT', 'OPEN CIRCUIT', and 'Chl. error'.
Explains when and how to clean the electrolysis cell.
Guides on checking and maintaining the optional Redox probe.
Details the recommended procedure for cleaning and maintaining the pH probe.
Refers to section 3.5.2 for checking and maintaining the amperometric probe.
Provides a table with problems, causes, and solutions for the amperometric probe.
General| Brand | BSV |
|---|---|
| Model | BS POOL PRO Series |
| Category | Swimming Pool Filter |
| Language | English |
To Next Page
