Need help?Do you have a question about the BSVILLAGE Hayward Micro and is the answer not in the manual?
Essential safety guidelines for handling refrigerants, installation, and maintenance operations.
Critical warnings regarding electrical safety, use with swimmers, and child safety for the heat pump.
Information about the R32 refrigerant, its properties, and environmental considerations.
Detailed performance metrics, power supply, and operational data for the heat pump models.
Physical measurements and diagrams of the heat pump unit for installation planning.
Requirements and applicable standards for correct outdoor installation of the heat pump.
Visual representation of the heat pump's system and water flow connections.
Step-by-step guide for connecting the water pipes to the heat pump, including fittings.
Procedures and safety precautions for wiring the heat pump correctly.
Instructions for testing the residual-current device (RCD) for electrical safety compliance.
Explanation of the heat pump's control panel interface, buttons, and operating modes.
Step-by-step guide for initial activation and setup after the heat pump is installed.
Instructions for connecting and using the smartphone app for remote control of the heat pump.
How to adjust and monitor the desired water temperature on the control panel.
Guide to adjusting the bypass valve for optimal water flow and temperature difference.
Recommended temperature and humidity limits for safe and effective heat pump operation.
Tasks required to ensure good working order and longevity of the heat pump.
Steps for preparing and storing the heat pump during the off-season.
Guidelines for environmentally responsible disposal of the heat pump unit.
Schematic representation of the heat pump's electrical system and components.
Visual breakdown of unit components and a list of part numbers for replacement.
A list of common problems, error codes, and their respective solutions.
Information on warranty coverage, terms, conditions, and claim procedures.
To Next Page
General