BT 2011 User Manual

To find a handset’s extension number
• Press the INT button.
• The handset’s extension number is
displayed ie. INTERN 3.
To page a handset from the base
station
To locate handsets that are away
from the base station.
• Press the
PAGING button on the
base. All handsets registered with
the base will ring for 30 seconds.
• To stop paging press the
PAGING
button again.
To receive a paged call
The display show:
• Pick up the handset from the base.
Or
• Press the PHONE button.
To put an outside call on hold while
you make an internal call
• Press the INT button.
• Dial the extension number you
wish to contact.
• To go back to your caller press
RECALL.
The internal number you called will
hear internal busy tone and will need
to press the
END button to end the
connection.
External C all
RING OFF
To delete a redial number
• Press the REDIAL button.
• Press the
DOWN button to
highlight the number you want.
• Press the
MORE OPTIONS button.
• Press the
DOWN button to highlight
DELETE NUMBER
• Press the
OK button to confirm.
Paging and making calls
between handsets
If you have multiple handsets
registered with the base, the Diverse
2011 enables two handsets to talk to
each other on an internal ‘intercom’
call, while a third handset can be on
an external call.
To make an internal intercom call
• Press the INT button.
• Dial the internal handset number
you wish to call.
To call all other handsets registered
to the same base
• Press the INT button.
• Press the
*
button. Display shows
all handsets registered.
• All handsets are called. You can talk
to the first handset that answers.
Alternatively, press the
COLL.CALL
option after you press INT button.
11
INT
INT
INT
INT
COLL.CAL
Rcl
➞➞
RED
I
OK
▼
-
-
–
–
–
–
–
#

BT 2011 Specifications

General

Standby Time	Up to 100 hours
Caller ID	Yes
Handset Quantity	1
Answering Machine	No
Type	Cordless
Range	Up to 300 meters
Battery Life	Up to 10 hours
Phonebook Capacity	50 entries