26
• Press the OK button.
• Enter the new PIN.
• Press the
OK button.
• Repeat the new PIN.
• Press the
OK button to confirm.
You can correct any mistakes when
entering the PIN by using the
LEFT/RIGHT and CLEAR CHARACTER
buttons.
Call allocation
If you have registered additional
handsets with your Diverse 2011 base
station you can specify the way you
wish the phones to ring.
Group ringing
Your Diverse 2011 will ring all
handsets registered to its base
whenever there is an incoming call.
This is called group ringing.
Ring priority
Your Diverse 2011 can be set so that
an incoming call will ring first at a
preferred handset. If there is no
answer, the call will revert to all
other handsets. This is called ring
priority.
Your Diverse 2011 is preset for group
ringing.
Try not to forget your PIN number
because expert technical help will be
needed to release the phone. If you
do forget your PIN, contact the
Diverse Helpline on
08457 908070.
To change between ring priority
and group ringing
The handset must be switched ON.
• Press the
INT button.
• Press the
SET button
• Press the
#
button.
• Press the
1 button.
• Enter the system code.
(default = 0000).
• Press the
REDIAL button.
• Press the
✱
button.
• Press the
2 and then the 3 button.
Display shows current setting.
• Press the
2 button to select
RING PRIORITY.
Or
• Press the
1 button to select
GROUP RINGING.
• Press the
SET button to confirm.
To set which handset will receive
ring priority
Once you have set your Diverse 2011
to ring priority mode (see above),
you can select the handset you want to
ring first.
• Press the
INT button.
• Press the
SET button
• Press the
#
button.
• Press the
1 button.
• Enter the system code
(default = 0000).
• Press the
REDIAL button.
• Press the
✱
button.
• Press the
2 button twice.
• Press the handset number you want
to ring first for all incoming calls.
• Press the
SET button to confirm.
➞➞
#
1
2
ABC
3
DEF
✱
a A
INT
➞➞
#
1
2
ABC
✱
a A
INT
SET
SET
To Next Page
Loading...
Need help?
General
