BT 3100 User Manual

Synergy 3100 user guide ~ 5th Edition ~ 26th September ’02 ~ 4457
15
During a call:
You can adjust the earpiece
volume. There are 5 levels to
choose from.
Press the UP or DOWN
button until you reach the
required level. This will be
shown on the display.
eg: EAR VOL 3.
In standby mode:
Press the  button.
Press the DOWN button until
HANDSET is displayed.
Press the  button.
Press the DOWN button until
EAR VOL is displayed.
Press the  button.
Press the UP or DOWN
button until you reach the
required level.
Press the  button to confirm
the selected level.
Press and hold the
✘ button to
return to the standby screen.
To receive a call
When the phone rings the
display will show CALL and
the EXT symbol will flash.
If you have subscribed to a
Caller Display Service, the
number (and name if stored
in the phonebook) will be
displayed.
Press the TALK button.
Or
If the handset is on the base,
simply lift it up and speak.
en
u
M
en
u
M
cr
e
c
e
y
S
C
a
l
l
s
Vol
C
a
l
l
s
Vol
R
e
d
i
a
l
To adjust the speech volume
during a call
To end a call
Press the TALK button.
Or
Place the handset back on
the base.
C
a
l
l
s
Vol
R
e
d
i
a
l
en
u
M
en
u
M
C
a
l
l
s
Vol
Note
You can switch the Auto-Talk feature
on or off. Please see page 22.
USING YOUR PHONE

BT 3100 Specifications

General

GAP Compatible	Yes
Phonebook entries	50
Ringer Control	Yes
Caller ID	Yes
Call Waiting	Yes
Talk Time	10 hours
Standby Time	100 hours
Number of Handsets	1
Answering Machine	No
Range Indoor	50 meters
Range Outdoor	300 m