BT 3100 User Manual

Synergy 3100 user guide ~ 5th Edition ~ 26th September ’02 ~ 4457
32
To de-register a Synergy 3000
additional handset from
the base
Press the  button to enter
the menu.
Use the DOWN button to
scroll to SETUP and press the
 button.
Use the DOWN button to
scroll to DEL HS and press
the  button.
The display will show PIN?
Enter your 4-digit PIN.
Press the  button.
Use the UP or DOWN button
to select the handset you want
to de-register (HANDSET 1-5).
Press the  button. Display
shows CONFIRM?.
Press . You will hear a
confirmation beep.
Once de-registered, the
handset will display NOT REG.
that are flashing indicate
other bases that the handset is
already registered to).
Enter the base number
(BS 1-4) that you want to
register the handset to.
Enter your 4-digit PIN
(original factory setting OOOO)
and press the  button.
The display will show
SEARCH 1, 2, 3, 4 and the
symbol will flash as the
handset tries to locate the base.
When the handset locates
the base, the handset will be
automatically selected and
shown on the display.
Note
Handsets can only be de-registered
via another handset.
Note
Your 4 digit PIN number is 0000
unless you have previously allocated
a new PIN number as explained on
page 25.
Note
If the handset does not locate the
base, the handset will return to
the previous menu. Try to register
again by using a different
available base number. Ensure
that you are in close vicinity of
the base).
en
u
M
en
u
M
en
u
M
en
u
M
en
u
M
en
u
M
C
a
l
l
s
Vol
R
e
d
i
a
l
C
a
l
l
s
Vol
R
e
d
i
a
l
C
a
l
l
s
Vol
R
e
d
i
a
l
ADDITIONAL

BT 3100 Specifications

General

GAP Compatible	Yes
Phonebook entries	50
Ringer Control	Yes
Caller ID	Yes
Call Waiting	Yes
Talk Time	10 hours
Standby Time	100 hours
Number of Handsets	1
Answering Machine	No
Range Indoor	50 meters
Range Outdoor	300 m