BT 450 - Using the Phone; Making and Ending Calls

Using the phone 16
When you make a call, the
light on the base flashes.
Call timer
Your handset will automatically time
the duration of all external calls.
The handset display shows the call
duration both during and for a few
seconds after your call.
Out of range warning
When the handset goes out of range of
the base, the flashes.
If you are on a call, the line will hang
up. Move back within in range. The
handset will automatically re-connect
to the base.
Switch handset on or off
To switch off
1. Press and hold .
2.
Switch off? is displayed, press Yes to confirm.
To switch on
1. Press and hold .
2.
Switch off? is displayed, press No .
Make an external call
1. Press .
2. When you hear the dial tone, dial the number.
Preparatory dialling
1. Dial the number first. If you make a mistake press
Clear to
delete the last digit.
2. Press to dial.
End a call
1. Press .
If you experience any problems, please call the Helpline on 0800 218 2182* or email bt.helpdesk@vtecheurope.com