52
If you experience any problems, please call the Helpline on 0800 218 2182* or email bt.helpdesk@vtecheurope.com
to play the next message.
to pause and resume playback.
to stop playback.
adjust the speaker volume + or – during playback.
At the end of playback press and follow the voice
prompt to press again to delete all old messages.
Remote access
You can operate your answering machine from any
Touchtone™ phone by calling your BT Verve 450 and
entering a 4 digit security code.
To enable/disable remote access
1. Press
Menu
. Scroll to
Answer machine
and press
OK
.
2. Scroll or to
Remote access
and press
OK
.
3. Press or to select
Disable
or
Enable
.
4. If you select
Enable
the display asks you to enter the Remote
access PIN. Enter the current 4-digit PIN. The default setting
is 0000. Press
OK
.
5. Enter a new PIN. Press
OK
. Enter the PIN again and press
OK
to save.
Answering machine
Remote access
When enabled, you can call in from
another phone to listen to your
messages and operate your answering
machine. You are asked to set a Remote
Access PIN so that other people cannot
ring up and listen to your messages.
When Disable is selected on the
Remote access settings, the PIN is
automatically re-set to 0000.
To Next Page
Loading...
