I
0800 145 6789* or go to www.bt.com/producthelp
32
%
X
r
8
i
4
#
y to save a Speed
dial entry under a Speed dial
button that has already been
populated, the display will show
Replace
number?
and you
will hear an error tone. You can
either overwrite the existing
entry by pressing and holding
the same Speed dial button
or press and hold a different
Speed dial button.
If you try to save a Speed
dial entry under a Speed dial
button that has already been
populated, the display will
show
Replace
number?
and you
will hear an error tone. You can
overwrite the existing entry by
pressing
s
-
+
+
]
-
]
+
:
the Speed dial buttons
*
d
utton
pre-programmed with 1571 but you can delete
this and replace it with an entry of your choice.
Once a Speed dial entry has been stored you can
simply press and hold the Speed dial button to
automatically dial the number stored under it.
S
^
S
;
1
*
From the the home screen, enter the telephone
number you want to store.
2. Then, either:
Press and hold the Speed dial button
you want to store the number under. The display
will show
Saved
as
speed
dial
X
(x being the Speed
dial button) and you will hear a confirmation tone.
Or,
Select
Options
by pressing
*
T
;
show
Save
as
speed
dial
. Press
*
f
ess
or
;
S
-
-
]
;
-
want to save the entry under and press
*
The display will show
Saved
as
speed
dial
X
(x being the Speed dial button) and you will hear
a confirmation tone.
To Next Page
Loading...
Need help?
General
