To Next PageTo Next Page
Need help?Do you have a question about the BT BT7660 and is the answer not in the manual?
General| GAP Compatible | Yes |
|---|---|
| Phonebook entries | 50 |
| Caller ID | Yes |
| Call Waiting | Yes |
| Speakerphone | Yes |
| Answering Machine | Yes |
| Handsets | 1 |
| Conference Call | Yes |
| Redial | Yes |
| Intercom | Yes |
| Type | Cordless Telephone |
| Recording Time | 30 minutes |
| Talk Time | 12 hours |
| Standby Time | 120 hours |
| Range Indoor | 50 meters |
| Range Outdoor | 300 meters |
Instructions for setting the answer machine to answer calls.
Guidance on optimal placement for best range and reception.
Items included when purchasing extra handsets.
Crucial note about using only supplied accessories for the device.
Placement advice for optimal signal and avoiding interference during setup.
Step-by-step instructions for connecting the phone base and power.
Details on charging, battery life, and low battery warnings.
Instructions for registering and setting up extra handsets.
Tips for maintaining battery health and optimizing battery longevity.
Confirmation that the phone is set up and ready for operation.
Advice on connecting the phone to a line with broadband, including microfilters.
Explanation of the functions of each button on the handset.
Meaning and interpretation of icons shown on the handset display.
Guide on how to navigate through the phone's menus and options.
Visual representation of the phone's menu structure and options.
Information on setting the clock, alarms, and related tones.
Overview of advanced settings and personal customization options.
Explanation of the functions of buttons located on the phone's base.
Instructions for switching the handset on/off and making/ending calls.
Using Mute, Handsfree, Auto Pick-up, and Out of Range warnings.
How to redial numbers and view/dial entries from the redial list.
Explanation of the need for Caller Display to use call blocking features.
Steps to block calls based on call type or specific numbers.
How to enable or disable the BT Call Blocking feature.
Setting up exceptions to allow specific VIP calls.
Instructions for viewing and managing numbers in the block list.
Configuring start and end times for call blocking features.
How to remove numbers from the block list or unblock a number.
Ways to use the dedicated Block button for call management.
Procedure for changing the default 4-digit access PIN for security.
Steps to save new contacts with names and numbers in the phonebook.
Reference for characters available when entering names.
How to find and call contacts stored in the phonebook.
Methods for searching alphabetically and editing existing contacts.
How to add call pauses and delete contacts from the phonebook.
Procedure for removing all contacts from the phonebook.
Assigning phonebook entries to speed dial buttons for quick access.
How to use speed dial buttons to make calls.
Information about subscribing to and using the Caller Display service.
How the Calls List stores and displays incoming and missed calls.
How to navigate and make calls from the recorded Calls List.
Steps to save a number from the Calls List into the phonebook.
Procedures for deleting individual or all entries from the Calls List.
How to turn the answer machine on or off from the handset.
Information about pre-recorded and custom outgoing messages.
Steps to record a personalized outgoing message.
How to listen to the current outgoing message.
How to record and play memo messages for other users.
Choosing between Answer + Rec and Answer Only modes.
Configuring the number of rings before the answer machine activates.
Using Handset or Base screening to listen to callers.
How to play new and old messages directly from the handset.
Using buttons to control playback, skip, and adjust volume.
Procedure for clearing all recorded messages.
Operating the answer machine functions directly from the base unit.
Listening to messages remotely and managing remote access PIN.
Steps to activate or deactivate remote access to the answer machine.
Customizing the handset's ringtone melody and ringer volume.
Turning keypad tones on/off and personalizing the handset name.
Adjusting display backlight and call settings like Auto Pick-Up.
Customizing the base unit's ringtone and ringer volume.
Procedures for changing system and access PINs for security.
How to reset the phone to its original factory settings.
Steps to register additional GAP compliant handsets to the base.
Procedure for removing registered handsets from the base.
How to make calls between registered handsets.
How to transfer an external call from one handset to another.
Instructions for managing three-way conference calls.
Solutions for common issues like no dial tone or non-functional phone.
Troubleshooting steps for problems making or receiving calls.
Diagnosing why the handset might not be ringing.
Resolving issues with the display, range icon, and busy tone.
Troubleshooting why caller ID or name is not displayed.
Solving problems with registering handsets or base unit not ringing.
Addressing buzzing noise or interference from other electrical equipment.
Essential safety precautions and care guidelines for the phone.
Guidelines for proper installation and placement of the phone.
Advice on product care, maintenance, and potential hazards.
Guidelines for safe handling and disposal of batteries.
Instructions on how to replace handset batteries.
Information on the environmentally responsible disposal of old electronics.
Declarations of conformity for EU and UK radio equipment regulations.
Details on the product guarantee period, conditions, and return process.
Information on obtaining repairs after the guarantee period has ended.
Details on REN numbers, switchboard compatibility, and recall features.
Section for recording purchase details and PIN numbers.
