BT BT2500 - System PIN and reset procedures

I                         
0800 145 6789* or go to www.bt.com/producthelp
S
   
ngs 55
5 ! "
0
" X
3
i
n 4
Z r Z
4
" h ' %

6 Z À À À À s
You can change this to your
own preferred 4-digit code.
The system PIN is used when
changing certain settings and
for registration/de-registration.
If you make a mistake, select
Del. to delete a digit.
C     
the system PIN
1 *
Select Menu , scroll
 
Settings and press
*
2. Sounds is displayed, press
-    
Change System
PIN is displayed and press
*
3. If the current PIN is 0000, you will be prompted to
enter the new 4 digit PIN, then press
*
(Or, if the current PIN is not 0000,enter the old
(current) 4 digit PIN first and then press
*
Then follow the prompts and enter the new 4
digit PIN).
4. Enter the new 4 digit PIN again and press
*
The display will show New system PIN saved and you
will hear a confirmation tone.