11 Using your phone
• IMPORTANT
After an incoming call, or after lifting the handset, your BT Decor 1100 will check
t
he line for any messages. You will experience at least a 2 minute delay before
the message waiting indicator light flashes if messages have been left.
Wall mounting
•
IMPORTANT
Before you wall mount, please check that:
• the wall can support the weight of the phone
• you are not drilling into any hidden wiring
• the telephone line cord will reach the telephone socket
BT are not responsible for any damage/injury caused while attempting to wall
mount your phone.
1. Revolve the handset catch to keep the handset in place when
wall mounted.
2. Remove the base plinth by turning the plinth lock switch on the
underside of the phone to the ‘unlock’ position and unclip.
3. Drill 2 holes with a 5mm drill for the screws provided, using the
template on the back page.
4. Insert the wall plugs provided and then insert a screw into each
hole. Leave a gap between the head of the screw and the wall
(approx. 9mm).
5. Position the product onto the screws.
6. Drop down to secure into place.
To Next Page
Loading...
