BT DECOR 310 USER GUIDE 310 User Manual

To set the ringer tone
There are 4 ringer tones to
choose from: TYPE 1-4. The
default setting is TYPE 1.
You can select a different ring
tone for each group in your
directory so you will have an
indication of who is calling you
when the phone rings, e.g.
NORMAL, FRIEND, FAMILY
or VIP.
Press the MENU button.
Use the DOWN arrow button
to scroll to RINGER TYPE.
Press the ENTER button. The
display will show the ring group
and tone, e.g: NORMAL TYPE
1. You will hear a sample tone.
Use the LEFT or RIGHT arrow
button to select the required
tone for the ringer group
displayed. (TYPE 1-4). You will
hear a sample tone.
Press the ENTER button to
confirm the tone you want.
The display will show SAVED
and you will hear a confirmation
tone.
The display will show the
next caller group, e.g: FRIEND
TYPE 2.
Repeat these instructions to set
the ring tones for the remaining
caller groups.
BT Decor 310 ~ Issue 2 ~ 1st Edition ~ 27th August ’03 ~ 5598
12
To adjust the ringer volume
There are 3 volume levels to
choose from: HIGH, LOW or
OFF. The default setting is
HIGH.
Press the MENU button.
Use the DOWN arrow button
to scroll to RINGER LEVEL.
Press the ENTER button. The
display will show HIGH, LOW,
OFF and the current setting
will flash.
Use the LEFT or RIGHT arrow
button to select the required
level.
Press the ENTER button to
confirm. The display will show
SAVED and you will hear a
confirmation tone.
Press the EXIT button to
return to the normal display.
Note
If the ringer is set to OFF the
display will show RINGER
OFF. The call indicator light
will still flash to indicate
someone is calling you.

BT DECOR 310 USER GUIDE 310 Specifications

General

Brand	BT
Model	DECOR 310 USER GUIDE 310
Category	Telephone
Language	English