Elements – New Style – Edition 4 – 31.08.06 – 7644
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
You can use up to five GAP compatible handsets with your BT
Elements base to extend your phone system without needing
to install extension sockets for each new phone.
Your BT Elements handset can be registered to up to 4 bases.
You can then select the base you would prefer
to use.
You need to register any additional handsets you purchase to
your BT Elements base.
Registering a new BT Elements handset
At the base:
1. Press and hold until you hear a beep, then release it.
The base will now remain in registration mode for 90 seconds,
during which time you will need to complete the following
procedure.
A
t the new handset:
2. Press to open the main menu.
3. Press or until
Register
is displayed, then
press .
4. Press or to highlight
Reg Base
and press .
5. Enter a base number (from 1 to 4) and press .
Additional handsets must be fully
charged before attempting to register.
If the handset is already registered to
a base, the base number will flash.
The default PIN code is 0000.
Using additional handsets
53
To Next Page
Loading...
