Ensure the charger is connected to
the mains at all times.
Additionally, if you have purchased a
BT Equinox 1350 multiple pack
For each additional handset & charger:
1. Connect the power adaptor to the charger and switch on.
2. Insert the batteries.
3. Charge the handset for at least 24 hours.
Your BT Equinox 1350 additional handset comes
pre-registered to the base as Handset 2 and this is shown
on the display.
Your BT Equinox 1350 multiple pack is now ready
for use.
Getting started 11
BT Equinox 1350 – Edition 4.1 – 27.09.05 – 6576
If you experience any problems, please call the Helpline on 0870 605 8047
To Next Page
Loading...
