13
2 Check box contents.
3 The rechargeable batteries are already installed. Pull the
plastic tab away from the handset to activate them.
If you ever need to remove the batteries, slide open the
battery compartment cover and insert your nger nail
under the end of one the batteries to pull it out.
AAA Ni-MH rechargeable
batteries (x2)
pre-installed in handset
User Guide
Charging
cradle
Power adapter (not
required when cradle
is attached to Hub)
BT Hub Phone 2.1
Note: the position of the pull out tab may be different
on some phones
To Next Page
Loading...
