BT Versatility
Owner's Manual
26
To hold an External Conference
• When on a call, press the Scroll Down Key (Ô) until ‘External Conference’ is displayed.
• Select ‘External conference’.
• Select a free Line and dial the external number.
• When the call is answered, select ‘Conference’ on the Display.
Note: An external conference call ties up two exchange lines. Such calls are called trunk-to-trunk
calls.
Note: At the start of a conference call a single tone is presented to all parties to indicate that the
call is a conference call.
From a standard telephone, press R when on a call, place the second call and when it is
answered, dial R3.
Using your Featurephone with a headset
Your Featurephone is equipped with a socket for a Headset. When you plug the headset into the
socket a prompt ‘Headset On' is presented on the display.
Select ‘Headset On'. The phone is now programmed to operate with a headset.
'Headset Off' is now displayed to allow you to revert to handset mode.
To make an internal or external call when using a headset
• Press the Hands-free Key and dial your calls in the normal way.
To clear down (end) a call when using headset
• Press the Hands-free Key.
To answer a call when using a headset
• Select the ‘Answer the call’ option on the Display, or press the Hands-free Key.
To Next Page
Loading...