Instruction Manual
4. Sound ON/OFF Setting
1. Part Description 2. Meeting VAN
3. Clock Operation 5. How to Replace Button Battery
Front
How to look at the clock
How to change the clock
Back
Not for Children under
3 years. Do not put
inside the mouth.
Ages 6+ up
Contains small parts.
Never allow children to play with the small parts, as they could be a
choking hazard and cause suffocation.
<If the battery is used incorrectly, there is a risk of overheating, rupture, and leakage.
Please pay attention to the following points.>
● It is dangerous to swallow button
batteries. Keep out of reach of children. If swallowed, consult your doctor
immediately.
● The button battery must be changed by your guardian.
● Do not mix the old and new batteries with other types of batteries. ● Please insert
into cathode and anode correctly.
● Do not short-circuit, charge, decompose, heat,
solder, or put into water. There is a high risk of getting damaged.
● Please follow the method of disposal, based on your district.
<Caution Before Use>
● Deleted data is difficult to recover. We ask for your understanding.
● Please throw away the packaging as soon as you open it.
● As there is paint on the product, do not place it on a resin sofa, sheet, tile, etc.
for a long time. The color may change.
● Do not put force or bend the attachments of this product.
● The set button battery is for testing. If the screen doesn’t display properly,
please exchange the button battery with a new one.
● The product consists of small parts. Do not drop, wet, make dirty or disassemble.
Avoid use and storage in places that are too hot or too cold.
● Please press the reset button, in case of malfunction.
● Clock Accuracy: Within 10 seconds per day
1. Remove the tab at the
bottom of the Tamagotchi.
▶The time setting screen will
appear with a beeping sound.
2. Reset Operation
Press the reset button on the
back of the casing with a thin,
pointed object. ▶ It will start to
beep.
*Do not put too much pressure on
the switch with a sharp object,
such as lead. There is a high risk of
getting damaged.
*Make sure to press the reset
button after changing the battery.
Press the opening/closing
button on the back of the
casing with a thin, sharp
object and slide the
battery cover downwards.
Remove the used batteries
and carefully insert the new
batteries (2 LR44 X 2/ not
provided).
Close the battery cover and
proceed with the [Reset Operation]
(>2 [Meeting with VAN] reference).
*When exchanging batteries, please change
both of the batteries.
3. Setting the Time
Set the current time in the
order of hour and minute by
selecting button A to scroll and
button B to choose/set the
time. Press button C to go back
to the previous step.
4. VAN Appearance
When the time is set up,
will come to you from space.
If you press button B on the
display screen, the clock
will appear.
When battery is all depleted, the screen
will not appear clearly and all actions
will slowly not get executed. When the
battery exchange display appears,
please replace the batteries.
If you press button B, the clock will
appear and if you press button A and
C at the same time, the clock setting
will display.
After, the [clock setting] (>2 [Meeting
with VAN] reference) is the same.
If you press button A and C
simultaneously, the sound
ON/OFF setting will display.
To turn sound ON or OFF, press
button A to select and button B to set.
*When the sound is off, the beeping
sound will be off as well.
CAUTION
WARNING
Guardian must read the following.
Ball
chain
Connector
Tab
Reset
Button
Time
Setting
Display
Battery
Exchange
Display
VAN
Appearance
Display
Reset
Switch
Battery
Cover
Button
for opening
and closing
A Button
▶Select
▶Scroll
B Button
▶Choose
▶Clock
Display
C Button
▶Cancel
▶Check Call
Straighten the
ball chain
connector and
press the top
and bottom
together to
separate the
chain.
Insert both ends of
the ball chain into
the connector and
pull left and right to
connect.
*All pictures shown
are for illustration
purpose only.
*Actual product may
vary from the images
shown.
Please be careful to not put it in the laundry when it is inside your pocket!
Do not put into water or operate with wet hands.
There is a high risk of getting damaged. Also, avoid use
and storage in humid areas.
*If the screen is malfunctioning or looks off, please perform the reset operation.
*The product cannot preserve data. Replacing the battery or performing a reset
operation may reset the data you have so far. Please be careful!
To Next Page
Need help?
General