BTX Intelligent Fashion SmartConnect User Manual

Universal MMC/RS232 Interface
Layout & Connections
BTX SmartConnect
1
BTX Window Automation - 2016 SmartConnect Instructions
© 2016 BTX Intelligent Fashion, LLC
(800) 422-8839 | www.btxinc.com
The BTX SmartConnect can be used to communicate between third-
party automation systems and BTX’s MMC RF motors and controls.
The SmartConnect can control units individually or as groups, and
is operated via RS232 input. Once the input is executed, a wireless
MMC RF radio command is sent to the automated BTX window
coverings system.
Antenna RS232 Input Power
RF Channel Dial
Pair
Close
Stop
Open
Pin 8
Common
Common
RS232 RX
RS232 TX
To RS232 TX
To RS232 Ground
To RS232 RX
Pin 1
RS232 Pin-Out
(Shown Tab-side Down)

BTX Intelligent Fashion SmartConnect Specifications

General

Brand	BTX
Model	Intelligent Fashion SmartConnect
Category	Recording Equipment
Language	English

Summary

Universal MMC/RS232 Interface Overview

Layout and Connections Diagram

Illustrates the physical connections and ports of the SmartConnect device.

BTX SmartConnect Operation

Initial Setup and Pairing

Provides steps for initial power connection, device placement, and pairing with motors.

RS232 Communication Settings

Details the required RS232 baud rate, data bits, and parity for communication.

SmartConnect RS232 Command Entry

Command Entry Formatting

Explains the structure for sending commands via RS232, including address, channel, and codes.

SmartConnect Electrical Specifications

Power and Frequency Details

Lists power input requirements and operating frequency for the SmartConnect.

FCC Compliance Information

FCC Labelling Requirements

Outlines the FCC rules and conditions for device operation.

User Information and Interference

Advises users on modifications and measures to resolve radio interference.