Do not use petrol which contains ethanol or methanol as it may damage
the fuel lines and other engine parts.
Mix only enough fuel for your immediate needs. If fuel must be stored
longer than 30 days, it should first be treated with a stabilizer or similar
product.
Starting / Stopping the machine
Cold start
1. Turn the switch to position I.
2. Move the choke lever to the close position (B)
3. Pump the fuel by pressing the priming pump (C) 10 times.
4. Pull the starter grip 4-6 times, until hear the engine crack sounds.
5. Move the choke lever to open position (E),Pull the starter grip 4-
6 timesagain, until the engine starts.(D)
6. Press the lock button and then the trigger (F) to start the operation.
HOT STARTING
1.Move throttle lever(A) to close position
To Next Page
Loading...