DO NOT operate your unit near or around flammable liquids or gases whether in or out
of doors. An explosion and/or fire may result.
DO NOT WEAR loose clothing, scarfs, neck chains, unconfined long hair, and the like.
Doing so could cause injury associated with objects being drawn into the rotating
parts.
DO NOT refuel a running engine or an engine that is hot.
Before using, always visually inspect to see that fasteners are secure, the housing is
undamaged and that guards and screens are in place. Replace worn or damaged
components in sets to preserve balance. Replace damaged or unreadable labels.
Before starting the machine, make certain that the tube is empty.
Keep your face and body away from the nozzle.
Do not allow hands or any other part of the body or clothing inside the discharge chute
or near any moving part.
Keep proper balance and footing at all times. Do not overreach. Never stand at a
higher level than the base of the machine when blowing material with it.
Always stand clear of the discharge zone when operating this machine.
To reduce the risk of hearing loss associated with sound level, hearing protection is
required.
To reduce the risk of injury associated with contacting rotating parts, stop the engine
before installing or removing attachments. Do not operate without guard in place. Always
disconnect the spark plug before performing maintenance or accessing any movable
parts.
Do not point the blower nozzle in the direction of people or pets.
Never run the unit without the proper equipment attached. When used as a blower,
always install the blower tubes.
operate the machine only at reasonable hours – not early in the morning or late at night
when people might be disturbed;
Do not to operate the machine near open windows.
Use rakes and brooms to loosen debris before blowing
Slightly dampen surfaces in dusty conditions or use mister attachment;
Limit the time of use of the tool. Take a time of rest between 2 operations. Do not work
earlier or later in the night. Do be exposed to noise and vibration for a prolonged time.
Noise can bring damage to the ears.
This machine is extremely noisy. Always wear a hearing protection when use the tool.
In the event of accident or breakdown, stop to use the machine. Switch off the tool and
wait until it completely stops. Check the problem. In case of blockage, clear the blockage
carefully. In case of breakdown, bring the tool to an after sales service for inspection and
reparation. Only use the tool when it is safely unblocked.
Operate the machine only at reasonable hours – not early in the morning or late at night
when people might be disturbed.
Maintenance and storage
When the machine is stopped for servicing, inspection, or storage, or to change an accessory,
shut off the power source and make sure that all moving parts have come to a complete stop.
Allow the machine to cool before making any inspections, adjustments, etc. Maintain the
machine with care and keep it clean.
Store the machine in a dry place out of the reach of children.
Always allow the machine to cool before storing.
Replace worn or damaged parts for safety. Use only genuine replacement parts and
To Next Page
Loading...