Need help?Do you have a question about the Bucher C-LRV 350 and is the answer not in the manual?
Provides critical information and details the main components of the C-LRV valve system.
Explains how to identify the valve type, flow rate, and pressure settings using the nameplate.
Explains the alphanumeric code used to specify valve type, flow range, and spool type.
Provides a detailed breakdown and schematic of the main valve assembly with numbered components.
Illustrates the system's hydraulic and electrical connections with component labels.
Explains the operational principles of the UP section, including acceleration, deceleration, and overload.
Details the operation of the DOWN section, including travel, deceleration, and power failure modes.
Warns about electrostatic discharge (ESD) risks and proper handling procedures for the C-DELCON.
Lists the default parameters for speeds and acceleration/deceleration.
Explains how the C-DELCON controls lift travel via command signals and feedback.
Explains the unit's connection to the main supply and control system, and its parameters like "SIU type".
Details the connections for mains voltage, control signals, and feedback cable.
Lists terminal functions for control signals, demand/feedback, and emergency power supply.
Emphasizes proper installation and continuity of the feedback cable to avoid operational issues.
Defines symbols for safety warnings: Attention, Caution, Warning, Danger.
Explains the function and operation of the emergency-lowering valve for lowering the car.
Details how to navigate the parameterisation mode and save/quit settings.
Explains the password protection feature for parameters and how to set/use passwords.
Details the format and meaning of fault codes displayed on the Handterminal for troubleshooting.
Introduces the WinDelta32 software for parameterisation and explains curve display features.
Provides step-by-step instructions for installing the WinDelta32 software.
Guides through removing old versions, installing new, and configuring WinDelta32 settings.
Shows how to physically connect the DELCON to a PC or laptop using various ports.
Provides instructions for orienting the ball-valve outlet and reorienting it if necessary.
Details connecting hoses/pipes and installing the power supply unit safely, with warnings.
Shows the wiring diagram for the power supply unit, including connections to the C-DELCON.
Explains how to power the unit via an external battery for emergency lowering.
Provides critical information and details the main components of the C-LRV valve system.
Explains how to identify the valve type, flow rate, and pressure settings using the nameplate.
Explains the alphanumeric code used to specify valve type, flow range, and spool type.
Provides a detailed breakdown and schematic of the main valve assembly with numbered components.
Illustrates the system's hydraulic and electrical connections with component labels.
Explains the operational principles of the UP section, including acceleration, deceleration, and overload.
Details the operation of the DOWN section, including travel, deceleration, and power failure modes.
Warns about electrostatic discharge (ESD) risks and proper handling procedures for the C-DELCON.
Lists the default parameters for speeds and acceleration/deceleration.
Explains how the C-DELCON controls lift travel via command signals and feedback.
Explains the unit's connection to the main supply and control system, and its parameters like "SIU type".
Details the connections for mains voltage, control signals, and feedback cable.
Lists terminal functions for control signals, demand/feedback, and emergency power supply.
Emphasizes proper installation and continuity of the feedback cable to avoid operational issues.
Defines symbols for safety warnings: Attention, Caution, Warning, Danger.
Explains the function and operation of the emergency-lowering valve for lowering the car.
Details how to navigate the parameterisation mode and save/quit settings.
Explains the password protection feature for parameters and how to set/use passwords.
Details the format and meaning of fault codes displayed on the Handterminal for troubleshooting.
Introduces the WinDelta32 software for parameterisation and explains curve display features.
Provides step-by-step instructions for installing the WinDelta32 software.
Guides through removing old versions, installing new, and configuring WinDelta32 settings.
Shows how to physically connect the DELCON to a PC or laptop using various ports.
Provides instructions for orienting the ball-valve outlet and reorienting it if necessary.
Details connecting hoses/pipes and installing the power supply unit safely, with warnings.
Shows the wiring diagram for the power supply unit, including connections to the C-DELCON.
Explains how to power the unit via an external battery for emergency lowering.
General| Brand | Bucher |
|---|---|
| Model | C-LRV 350 |
| Category | Control Unit |
| Language | English |
To Next Page
