To Next PageTo Next PageWhy Bucket Head Vacuum Cleaner won't pick up dirt?
If your Bucket Head Vacuum Cleaner isn't picking up dirt, there could be a few reasons. First, check the filter to see if it's clogged and clean or replace it. Second, the hose might be blocked with debris, so remove the hose and clear it. Finally, ensure the power head is securely attached to the bucket and that you're using a designated bucket type to prevent air leaks.
General| Model | BH01000 |
|---|---|
| Power Source | Corded Electric |
| Voltage | 120V |
| Hose Length | 7 feet |
| Cord Length | 10 ft |
| Included Tools | Crevice Tool, Dusting Brush |
| Type | Wet/Dry Vacuum Cleaner |
Explains the meaning of safety signal words like DANGER, WARNING, and CAUTION.
Provides essential safety warnings to reduce fire, electric shock, or injury risks.
Covers precautions like unplugging, cord care, hazardous materials, and safety eyewear.
Illustrates how to connect to a properly grounded outlet or use an adapter.
Provides instructions on how to securely attach and detach the powerhead from the bucket.
Explains how to align the handle/bail for safe carrying and prevent tip-overs.
Guides on correctly installing the filter for dry material pickup to prevent dust release.
Details the process for vacuuming liquids, including filter removal and float mechanism.
Step-by-step instructions on how to replace the vacuum filter for optimal performance.
Explains how to use the blowing function and related safety precautions.
Instructions on how to clean the exterior of the wet/dry vac.
Guidance on proper storage of the powerhead, including cord management.
Addresses issues like clogged filters, hoses, or air leaks affecting suction.
Provides a solution for the vac not turning on, primarily checking electricity.
