BuckMaster 28000 - Page 38

ZC-2-01 /26000-B
ACAUTION: Refer to chimney manufac-
turers
Instructions for assembly and
disassembly of chimney parts.
Be sure
to foHow chimney instructions for pro-
per clearances to combustibles and pro-
per
air spacing required.
Chimney Pipe
Y~'7"""S""'H'-- 2" • 4" Slu<l<ling
Double Iieado,
A Double Headm mus' be used on 3
toad br.,:uing wall This- musl be done.
12" above cabinet.
Sl"lllo H •• de,
A Siogle l'imujm must bo used as nart
of front haming, v~rHca. 2" x 4'''50
must be turned flat
NOTE; Finjshed wall must be
2'b .,. in honl of face of le.
CatJ{flet (wi! hout hood panel).
WARNING Ins'aH tho hea'th
pfot0Ctor only 39 sJ)l!ldHed Th-it
hfUU1tt ftxtoflslon mUll' ftxtond a
ffitnimom of 16" In front 0' ttl",
fiutptacft opitolng lind mwn be 38"
wtde m~olmum.
FIGURE3
EXTERIOR ROOF OR CHASE
WARNINGAInstall the hearth
protector
only as specified.
The hearth extension must
ex-
tend a minimum of 16" in front
of the fireplace opening and
must be
38" wide minimum.
Page 36