12
DP12VL
OPERATING INSTRUCTIONS
UNPACKING
WARNING
!
TOOLS NEEDED
The following tools (not included or drawn
to scale) are needed for assembly:
This product requires assembly.
1. Carefully remove the tool and any accessories from the box. Place it on a level
work surface.
NOTE: This tool is heavy. To avoid back injury, lift with your legs, not your back,
and get help when needed.
Do not use this product if any parts on the Loose Parts List are already assembled
to your product when you unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer installation. Use of a product
that may have been improperly assembled could result in serious personal injury.
2. Inspect the tool carefully to make sure no breakage or damage occurred
uring shipping.
3. Do not discard the packing material until you have carefully inspected the tool,
identified all loose parts, and satisfactorily operated the tool.
If any par
ts are damaged or missing, do not operate this tool until the parts are
replaced. Use of this product with damaged or missing parts could result in serious
personal injury.
Do not attempt to modify this tool or create accessories not recommended for
use with this tool. Any such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious personal injury.
supply until assembly is complete. Failure to comply
starting and possible serious personal injury.
WARNING
!
WARNING
!
B
A
C
A. Mallet or hammer
B. Adjustable wrench
C. Phillips screwdriver
To Next Page
Loading...
