14
Here are some tips for using the sharpener water reservoir:
• Check the water level before every use and be sure the wheel is wet before
you begin grinding. DO NOT use the sharpener without water.
• Leaving the grinding wheel stored in water will cause damage to the wheel
and create potential hazards because the wheel will become unbalanced.
Once any grinding process is complete, return the reservoir to the storage
position to prevent prolonged water exposure to the wheel.
will help prevent excessive metal accumulation on the grinding wheel.
Angle Guide
The sharpener comes with an angle guide to help identify and maintain the cutting
angle on a variety of tools
.
• Place a magnet in the recervior to catch and collect metal fillings.This
• Empty, rinse,and refill the recervior regularly. This prevents metal and stone
from accumulating in the reservior
.
To use the angle guide:
• Locate the eight measuring notches
tool you wish to grind by placing the
sharpened edge of the workpiece into
each notch.
•Adjust the positioning of the tool and the
universal support height as necessary so
necessary so that the sharpened edge
grinding
the angle
Figure 10
20
˚
60˚
25˚
25
˚
:
Schnitzmesser
Gemüsemesser
Filetiermesser
Kives for
woodcarving
Slicing, filleting
and paring
knives
40˚
:
Jagtmesser
Metzgermesser
Kochmesser
Hunting knives
Knives for cooks
and butchers
20˚
:
W
eichholz
Soft wood
30
˚
:
Hartholz
Hard wood
25
˚
:
Standart
60
˚
:
Scheren
Scissors
20˚
60˚
25
˚
30˚
Wheel Dressing
Depending on the type of grinding you do, the grinding wheel may require
periodic
dressing. A variety of dressing tools are available (not included) and can be used
to restore the
tabrasive quality of the wheel surface and bring the wheel edge back to
the right form.Refer to the instructions that accompany your dressing accessory for
complete details on how to properly dress a wheel.
•
When grinding, metal objects become heated quickly. It is important to keep moving
the object back and forth across the face of the grinding wheel and to cool the object
frequently using the
coolant tray.
SCM8080
wheel and the angle edge on
guide.
OPERATING INSTRUCTIONS
To Next Page
Loading...
