Bugaboo bee User Manual

34
5
exploring
attaching the rain cover
Come rain or shine, the Bugaboo Bee can protect a child in any
setting. The snug-fitting and fully ventilated rain cover is sure to keep
the child dry, warm and comfortable.
Fully extend the Bugaboo Bee sun canopy.
Place the rain cover on the head-end of
the backrest.
Pull the rain cover over the sun canopy so
that the Bugaboo label on the rain cover
lines up with the Bugaboo label on the
Bugaboo Bee. It should fit snugly.
The rain cover has an elastic loop and a
hook on each side. Fasten these together
around the Bugaboo Bee chassis to secure
the rain cover in place.
Attach the touch fasteners around the chassis
just above the wheels for extra security.
NOTE The rain cover will fit the Bugaboo Bee for
a child with a maximum bottom-to-head length
of 51cm/20.1 inches.
Adjust the touch fastener in the middle
of the rain cover to adapt the cover to the
chosen seat position.
By attaching the touch fasteners you create
an air vent.
1
2
3
4
5
6
7
exploring
BUGA_BEE_NA_Z80057_INNER.indb 34 9/5/07 16:34:56

Bugaboo bee Specifications

General

Type	Traditional stroller
Foldable	Yes
Wheels type	Solid wheels
Product color	Black, Stainless steel, Yellow
Number of seats	1 seat(s)
Recommended age (min)	- month(s)
Number of front wheels	2