step 2 fitting the tailored sun canopy
a. Fit the bassinet or seat onto the chassis.
b. Fit the sun canopy to the round side of the frame.
c. Pull the sun canopy over the head end of the frame.
d Click the 2 canopy clamps onto the frame at the point
where there is no rubber.
e Roll the top of the clamp onto the aluminum frame and
then secure the bottom of the clamp.
f Attach the elastic bands to the front of the canopy
clamps.
g Pull out the sun canopy.
Important You can also use the sun canopy to protect your
child from wind
WARNINGS
• Babies have very sensitive skin. Never put a baby in the Bugaboo Cameleon in
the sunlight without tting the sun canopy.