f Raise the handlebar. The chassis is now in the
2-wheel position.
Advice Put the swivel wheels in the underseat bag.
step 2 fitting the seat
a. Apply the parking brake.
b. Lay the chassis on the floor with the frame bearers
facing upwards.
c. Completely fold out the seat’s 2 frame supports.
d. Place the seat on the frame bearers.
e Push until you hear a ‘click’ on both sides. The seat is
now attached to the chassis.
f Push the handlebar up and move the seat to the
desired position.
g. Allow the handlebar to go down. Now place the child
in the seat.
h. Fasten the safety belts.
i. Place the wrist strap on your wrist.
To Next Page
Loading...
