Bugaboo Stroller - Page 17

b
c
eng
15
step 7 fitting the frame on the chassis
a. Fit the frame supports on the frame bearers.
b Press the frame downwards until you hear a ‘click’ on
both sides. The frame is now attached to the chassis.
WARNINGS
• To check whether the frame is attached to the chassis, pick up the frame. If the
frame releases one or both sides of the chassis, press the frame onto the
chassis again until you hear a ‘click’ on both sides.
other functions
placing the frame in different positions
a. Place the frame on the chassis.
b Squeeze together the squeeze-fastener on the
center shaft.
c Tip the frame forward and choose a position.
‘click’
‘click’