b
c
b
eng
16
WARNINGS
• Only the seat can be used in 3 positions on the frame. The bassinet can only be
used horizontally (See WARNINGS Section).
removing the frame from the chassis
a. Place the frame in the horizontal position.
b Simultaneously press the 2 square, white buttons on the
frame supports to release the frame.
c Pick up the frame.
d. Place the frame on the floor, resting on the frame
supports.
Important The 2 square, white buttons are always used to
remove the frame, with the bassinet or the seat,
before it is placed on the floor.
turning the frame around
You can turn around the frame to change the seat and bassinet options.
a. Remove the frame from the chassis.
b While holding the frame in the horizontal position,
turn it around.
c. Place it back on the chassis.
To Next Page
Loading...
Need help?
General
